| |
A Revolutionary Car Audio Speaker
Cable Emerges
If you want great sound quality, you can't stop with interconnects.
Speaker cable is just as important for enabling high fidelity sound.
Until now, there have been 3 types of car audio speaker cables available:
2 parallel conductors (zip cord), 2 twisted conductors, and "gamma"
twisted cable. Pear Cable has broken the car audio mold again by
introducing a 6-conductor cable that blows away all of the competition.
The Comice Speaker Cable uses 6 conductors for each speaker (3 for
the positive terminal and 3 for the negative terminal) to achieve
superior performance.
The Comice Speaker Cable absorbs less energy (when
compared to a cable of the same gauge), giving more accurate sound
than our competitors, and the numbers prove it (see graph at bottom
of page). With just 0.06 microH/ft of inductance, the Comice Speaker
Cable is the lowest inductance car audio speaker cable on the market
by far. Low inductance, mechanical resonance control, and reduced
skin effect, all place this cable a cut above the rest.
Hear what Brent from California had to say after buying both
Bosc and Comice speaker cable:
Listen
to Comments |
COMICE SPEAKER CABLE TECHNICAL DETAILS:
Low Inductance
By utilizing 6-conductors, precisely spaced in a spiraling helix,
the Comice Speaker Cable is able to achieve dramatically lower inductance
than traditional car audio speaker cables. How low? At just 0.06
microH/ft, the Comice Speaker Cable has just 1/3rd the inductance
of most car audio speaker cables. That means less energy will be
absorbed by the cable, giving you all the detail you desire.
Mechanical Resonance Control
The Comice Speaker Cable has been specifically designed to eliminate
mechanical resonance. Speaker cables carry a lot of current, which
creates magnetic fields around the conductors. In traditional 2-conductor
cables, these magnetic fields push the positive and negative conductors
apart at the frequency of the music, and can cause the cable to
vibrate. This vibration absorbs energy and distorts the audio signal.
The 6-conductor configuration of the Comice Speaker Cable neutralizes
much of the force caused by these magnetic fields. In addition,
the compressed cotton core of the cable in conjunction with the
compressive outer jacket helps to eliminate resonance caused by
any remaining magnetic fields. The end result is bass that hits
you like a brick (the way it should).
Highest Quality Materials
- High purity, 99.99% pure oxygen free copper, fully annealed
conductors are utilized in this cable. You won't find sound-degrading
silver-plated copper here. Plating conductors in cables that carry
music signals (interconnects and speaker cable) causes frequency
smearing due to the skin effect. High frequency information, which
gets pushed to the outside of the conductor, sees a different
resistance (from being in a different metal) than the low frequency
information. While being a problem in interconnects and speaker
cables, this is not a problem in power cables.
- Teflon primary insulation surrounds our high purity copper.
Teflon is the most expensive cable insulation material, but it
also gives the best frequency response of any solid cable insulation
material.
Better Noise Rejection
By utilizing 6-conductors in a spiraled helix, we have dramatically
increased noise rejection. Inducted alternator noise will have a
hard time finding its way into this cable.
Reduced Skin Effect
Skin effect is an electrical phenomenon that pushes high frequency
information to the outside of a conductor. This causes that high
frequency information to "see" less copper and experience higher
resistance than the low frequency information. By separating each
conductor into 3 individually insulated wires, we have dramatically
lowered the skin effect in the Comice Speaker Cable. This gives
your sound more detail and accuracy.
Made in the USA for superior quality
Numbers Don't Lie
The graph below demonstrates how the low inductance design of the
Comice Speaker Cable helps make it a more accurate car audio cable.
The Comice Speaker Cable resistance stays almost completely constant
throughout the audio band, while competing cables can increase in
resistance by more than 85%! This increase in resistance as the
frequency goes up causes competing cables to smear the frequency
response significantly more than the Comice Speaker Cable.
Want great speaker cable performance at a more economical price?
Check out our Bosc Speaker Cable
for a cable that still blows away our competition.
|
|
